Software-Tamron-MP2030M-GS-camera-control-software
הזז את העכבר מעל לתמונה או לחץ להגדלה

Harrier 30x AF-Zoom HD-SDI Camera Tamron MP2030M-2D-GS

  • Autofocus-zoom camera with global shutter.
  • Full HD 1920 x 1080 high resolution camera.
  • Video formats (HD): 1080p/30/25, 720p/60/50.
  • 30x optical zoom.
  • 1/1.8-type global shutter CMOS sensor.
  • HD-VLC™ output mode for long cable length applications.
  • Horizontal viewing angle: 60° – 2.5°.
  • Dimensions (L x W x H): 125 x 55 x 62.3mm.
  • VISCA camera control over RS-232/RS-485/TTL.
  • Simultaneous analog video output (PAL/NTSC) in 720p50/60 modes

אחריות יבואן רשמי

משלוח חינם

קנייה מאובטחת

תיאור

 

Image sensor 1/1.8-type global shutter CMOS sensor
Pixel output (H x V) 1920 x 1080, 1280 x 720
Video format (HD) Interface board HD-SDI: 1080p/30, 1080p/25, 720p/60, 720p/50
1080p/50 & 1080p/60 support on request for volume OEMs.
Camera LVDS : 1080p/60, 1080p/59.94, 1080p/50, 1080p/30, 1080p/25, 1080i/60, 1080i/59.94, 1080i/50, 720p/60, 720p/50
Video format (SD) NTSC / PAL
Minimum illumination 0.2lx (50% video level, F/1.6, 1/30 sec, color)
0.03lx (50% video level, F/1.6, 1/30 sec, B&W)
Recommended illumination 100lx to 100,000lx
Gain 0-48dB (25 steps)
Shutter speed 1/1 to 1/10,000 sec (22 steps)
Sync speed Internal
Exposure compensation -12dB to +12dB (total 13 steps)
Backlight compensation ON / OFF
Gamma Normal / straight / narrow / wide (4 modes)
Aperture control 16 steps
White balance ATW / manual / one push / indoor / outdoor
AE (Auto exposure mode) Auto / manual / shutter priority / iris priority
Lens (wide to tele) 30x optical zoom f=6.5 to 195.0mm F1.6 to 5.3
Zoom movement speed (wide to tele) 7.0 sec (focus tracking ON)
Digital zoom Up to 16x
Focusing system Auto, manual, one push, AF sensitivity
Horizontal viewing angle (wide to tele) 60° – 2.5°
Minimum object distance 0.3m (wide) 1.5m (tele)

Camera Functions

E.I.S. (Electrical Stabilizer) Available
Wide-D (Gamma) Available
BLC (Backlight Compensation) Available
Day / night (ICR) ON / OFF / AUTO
Auto slow shutter Max 1 sec
Defog Available
Noise reduction (3D + 2D) Available
Privacy zone masking Available
Slow shutter Available
Picture effects B&W, freeze, upside down, rotation
External trigger (still image) Available
Spot compensation Available
Temperature readout Available
Title display Available (1 line: 20 text, max 20 lines)

Connector Specification – Harrier 3G-SDI Camera Interface Board

KEL30 Connector (J1) The interface board on the camera is fitted with a 30-way miniature connector to link to the video output connector on the camera.

Connector type: KEL USL00-30L.

Mating cable: A 30-way micro coaxial cable (AS-CIB-USL30-100MM) is supplied with the camera. Lengths available: KEL USL20-30SS-010-C (100mm length) or KEL USL20-30SS-005-C (50mm length).

Input/Output Connector (J2) The interface board is fitted with an industry standard 4-way connector for VSync signal output and test pattern/reset control inputs.
Connector type: JST SM04B-SRSS-TB
Mating cable: A suitable cable is available as part of the cable kit AS-CIB-CBLKIT-003-A (see ordering information below).
See Harrier 3G-SDI Camera Interface Board datasheet for pin assignments and control options.
Power and Control Connector (J3) The interface board is fitted with an industry standard 10-way connector for power and serial control.
Connector type: JST SM10B-SRSS-TB
Mating cable: A suitable cable is available as part of the cable kit AS-CIB-CBLKIT-002-B (see ordering information below).
See Harrier 3G-SDI Camera Interface Board datasheet for pin assignments and output options.
HD-SDI Output Connector (J5) The interface board is fitted with a Hirose H.FL Micro Coaxial Connector (75 Ohm).
Connector type: Hirose Micro Coaxial Connector (Receptacle), part number H.FL-R-SMT(01).
Mating connector: Use mating cable with 75 Ohm characteristic impedance, for example Hirose part number H.FL75-2LP-084H-A-100. A suitable cable is available as part of the cable kit AS-CIB-CBLKIT-002-A (see ordering information below).
Analog Video Out (Pin 3, J3) Standard resolution composite analog is simultaneously available in HD modes 720p50 (for PAL) and 720p60/59.94 (for NTSC). There are two options for the analog output, selectable via serial control:

(a) the 1280 pixel wide HD image can be cropped to 960 wide, by cropping a 120 pixel strip off each side to make a 4:3 aspect ratio Standard Definition (SD) signal.

(b) by pre-warping the image, such that when displayed on a HD monitor in the monitor’s stretch-to-fit mode, the original full-width HD signal will be displayed correctly at 16:9 aspect ratio.

Both methods ensure the displayed pixels remain square and that the image is not distorted.

Video and Control Mode DIP Switch (SW1) The interface board is fitted with a 4-way DIP switch to select various video output and control modes.

The DIP switches to select the Video Format are read on power-up only. Therefore, to change mode using the DIP switches, power down the camera, set the switches and then power up the camera. DIP switches will only be effective for the operating modes supported by the camera currently in use.

See Harrier 3G-SDI Camera Interface Board datasheet for the configuration of the DIP switch SW1.

Communications Mode Selection (SW2) The interface board is also fitted with a 2-way DIP switch to select the serial communications standard. It allows to choose between RS-232 VISCA communications, RS-485 VISCA comms with RS-485 termination enabled, RS-485 VISCA comms with RS-485 termination disabled and TTL VISCA communications.

See Harrier 3G-SDI Camera Interface Board datasheet for the details and configuration of the DIP switch SW2.

Digital Transmission Standard Selection (SW3) The interface board is fitted with a 1-way DIP switch to select the SMPTE or HD-VLC digital output standards.

OFF = SMPTE compliant output.

ON = HD-VLC compressed output.

Camera Interfaces

Video output (HD) Interface board HD-SDI: 1080p/30, 1080p/25, 720p/60, 720p/50
1080p/50 & 1080p/60 support on request for volume OEMs.
Camera LVDS : 1080p/60, 1080p/59.94, 1080p/50, 1080p/30, 1080p/25, 1080i/60, 1080i/59.94, 1080i/50, 720p/60, 720p/50
Video output (SD) NTSC / PAL (CVBS)
Camera control interface Camera functions may be controlled by VISCA protocol over RS-485/RS-232/TTL.
VISCA protocol (VISCA is a trademark of SONY corporation)

Physical and Environmental Details

Power requirement 9V to 12V DC
Power consumption Approx. 5W (with zoom and focus operation)
Recommended temperature 0°C to +40°C
Operating temperature -5°C to +60°C
Storage temperature -40°C to +60°C
Dimensions (L x W x H) 125 x 55 x 62.3mm
Weight Approx. 370g